THE NATURE AND ORIGIN OF AUTHIGENIC CHLORITE AND RELATED CEMENTS IN OLIGO–MIOCENE RESERVOIR SANDSTONES,TAPTI GAS FIELDS,SURAT DEPRESSION,OFFSHORE WESTERN INDIA

Reservoir sandstones in the Mid‐ and South Tapti gas fields in the Surat Depression (Mumbai Offshore Basin, western India) have been investigated using a range of petrographic techniques, isotope geochemistry and basin modelling. Authigenic chlorite is abundant in the shallow‐marine sandstones of the Miocene Mahim Formation, a major reservoir rock in the Mid‐ and South Tapti fields, which are described here in terms of their quality and diagenetic characteristics. The sandstones are currently at burial depths of between ～1500 and 2800m. The authigenic chlorite has had a significant impact on the resulting reservoir quality of the sandstones and is interpreted to have originated as odinite clay of the verdine facies that replaced faecal or pseudo‐faecal pellets, together with volumetrically small but abundant grain coatings and grain rims, and formed at the site of major riverine iron influx onto the shallow‐marine shelf during periods of relatively low sea level. Pellets have been variably compacted to form pseudomatrix. Reservoir sandstones from similar depositional settings on the west coast of India or other sub‐tropical settings are likely to exhibit comparable diagenetic effects on reservoir quality. Compositionally, the chlorite is the iron‐rich form known as chamosite. The chemistry of all the chlorite morphologies is the same in all studied samples. Oxygen isotope analyses of carbonate cements in the Mahim Formation sandstones have provided an approximate temperature framework for diagenesis of the non‐carbonate cements. Oxygen isotope results for the chlorite, however, suggest much higher temperatures than its position in the paragenetic sequence would warrant. These results suggest that the clay formed first as 1:1 layer clays, in this case odinite, which were then transformed to Fe‐chlorite as burial depths and temperatures increased. Reservoirs in the Mahim, Daman and Mahuva Formation sandstones are thus greatly influenced by the diagenesis of authigenic chlorite and locally by the precipitation of carbonate cements. Reservoir quality is good where thick, continuous chlorite rim cements are present and where chlorite pellets are sufficiently indurated for them not to be compacted. Chlorite rim cements have reduced the extent of quartz overgrowth cementation in the sandstones.     

Poly dimethylsiloxane/carbon nanofiber nanocomposites: fabrication and characterization of electrical and thermal properties

This article presents the fabrication and characterization of poly dimethylsiloxane/carbon nanofiber (CNF)-based nanocomposites. Although silica and carbon nanoparticles have been traditionally used to reinforce mechanical properties in PDMS matrix nanocomposites, this article focuses on understanding their impacts on electrical and thermal properties. By adjusting both the silica and CNF concentrations, 12 different nanocomposite formulations were studied, and the thermal and electrical properties of these materials were experimentally characterized. The developed nanocomposites were prepared using a solvent-assisted method providing uniform dispersion of the CNFs in the polymer matrix. Scanning electron microscopy was employed to determine the dispersion of the CNFs at different length scales. The thermal properties, such as thermal stability and thermal diffusivity, of the developed nanocomposites were studied using thermogravimetirc and laser flash techniques. Furthermore, the electrical volume conductivity of each type of nanocomposite was tested using the four-probe method to eliminate the effects of contact electrical resistance during measurement. Experimental results showed that both CNFs and silica were able to impact on the overall properties of the synthesized PDMS/CNF nanocomposites. The developed nanocomposites have the potential to be applied to the development of new load sensors in the future.     

The Irradiation Performance and Microstructural Evolution in 9Cr-2W Steel Under Ion Irradiation

Grade 92 steel (9Cr-2W) is a ferritic-martensitic steel with good mechanical and thermal properties. It is being considered for structural applications in Generation IV reactors. Still, the irradiation performance of this alloy needs more investigation as a result of the limited available data. The irradiation performance investigation of Grade 92 steel would contribute to the understanding of engineering aspects including feasibility of application, economy, and maintenance. In this study, Grade 92 steel was irradiated by iron ion beam to 10, 50, and 100 dpa at 30 and 500 °C. In general, the samples exhibited good radiation damage resistance at these testing parameters. The radiation-induced hardening was higher at 30 °C with higher dislocation density; however, the dislocation density was less pronounced at higher temperature. Moreover, the irradiated samples at 30 °C had defect clusters and their density increased at higher doses. On the other hand, dislocation loops were found in the irradiated sample at 50 dpa and 500 °C. Further, the irradiated samples did not show any bubble or void.     

Visible Light Photocatalysis on Magnetically Recyclable Fe3O4/Cu2O Nanostructures

Catalysis Letters - Magnetically recyclable visible light photocatalysts for the degradation of critical organic pollutants are an urgent industrial requirement. Nonetheless, one component...     

Drug‐loaded polyurethane/clay nanocomposite nanofibers for topical drug‐delivery application

In this study, polyurethane/nanoclay nanocomposite nanofibrous webs were prepared by electrospinning. An antiseptic drug, chlorhexidine acetate (CA), was loaded onto montmorillonite clay and was then incorporated into polyurethane nanofibers. For comparison, the CA drug was loaded directly into the polyurethane solution dope used to electrospin the nanofibers. The emphasis was on investigating the effect of the drug loading into the nanoclay vis‐à‐vis direct drug loading on the drug‐release behavior of nanofibrous webs. The nanofibrous webs were also evaluated for other properties, such as moisture vapor transmission, porosity determination, contact angle measurement, and antibacterial activity, which are important for topical drug‐delivery application. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40230.     

Preparation of CaCO3‐based biomineralized polyvinylpyrrolidone–carboxymethylcellulose hydrogels and their viscoelastic behavior

In the blend of natural and synthetic polymer‐based biomaterial of polyvinylpyrrolidone (PVP) and carboxymethylcellulose (CMC), fabrication of CaCO₃ was successfully accomplished using simple liquid diffusion technique. The present study emphasizes the biomimetic mineralization in PVP–CMC hydrogel, and furthermore, several properties of this regenerated and functionalized hydrogel membranes were investigated. The physical properties were studied and confirmed the presence of CaCO₃ mineral in hydrogel by Fourier transform infrared spectroscopy and Scanning electron microscopy. Moreover, the absorptivity of water and mineral by PVP–CMC hydrogel was studied to determine its absorption capacity. Further, the viscoelastic properties (storage modulus, loss modulus, and complex viscosity) of mineralized and swelled samples (time: 5–150 min) were measured against angular frequency. It is interesting to know the increase of elastic nature of mineralized hydrogel filled with CaCO₃ maintaining the correlation between elastic property and viscous one of pure hydrogel. All these properties of biomineralized hydrogel suggest its application in biomedical field, like bone treatment, bone tissue regeneration, dental plaque and tissue replacement, etc. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40237.     

Optimal security hardening on attack tree models of networks: a cost-benefit analysis

Researchers have previously looked into the problem of determining whether a given set of security hardening measures can effectively make a networked system secure. However, system administrators are often faced with a more challenging problem since they have to work within a fixed budget which may be less than the minimum cost of system hardening. An attacker, on the other hand, explores alternative attack scenarios to inflict the maximum damage possible when the security controls are in place, very often rendering the optimality of the controls invalid. In this work, we develop a systematic approach to perform a cost-benefit analysis on the problem of optimal security hardening under such conditions. Using evolutionary paradigms such as multi-objective optimization and competitive co-evolution, we model the attacker-defender interaction as an “arms race”, and explore how security controls can be placed in a network to induce a maximum return on investment.     

Synthesis of nanocrystalline hydroxyapatite using surfactant template systems: Role of templates in controlling morphology

Hydroxyapatite (HA) nanopowder was synthesized by reverse microemulsion technique using calcium nitrate and phosphoric acid as starting materials in aqueous phase. Cyclohexane, hexane, and isooctane were used as organic solvents, and Dioctyl sulfosuccinate sodium salt (AOT), dodecyl phosphate (DP), NP5 (poly(oxyethylene)₅ nonylphenol ether), and NP12 (poly(oxyethylene)₁₂ nonylphenol ether) as surfactants to make the emulsion. Effect of synthesis parameters, such as type of surfactant, aqueous to organic ratio (A/O), pH and temperature on powder characteristics were studied. It was found that the surfactant templates played a significant role in regulating the morphology of the nanoparticle. Hydroxyapatite nanoparticle of different morphologies such as spherical, needle shape or rod-like were obtained by adjusting the conditions of the emulsion system. Synthesized powder was characterized using X-ray diffraction (XRD), BET surface area and transmission electron microscopy (TEM). Phase pure HA nanopowder with highest surface area of 121 m²/g were prepared by this technique using NP5 as a surfactant. Densification studies showed that this nanoparticle can give about 98% of their theoretical density. In vitro bioactivity of the dense HA compacts was confirmed by excellent apatite layer formation after 21 days in SBF solution. Cell material interaction study showed good cell attachment and after 5 days cells were proliferated on HA compacts in OPC1 cell culture medium. The results imply this to be a versatile approach for making hydroxyapatite nanocrystals with controlled morphology and excellent biocompatibility.     

Taguchi analysis of surface modification technique using W-Cu powder metallurgy sintered tools in EDM and characterization of the deposited layer

The present study describes an experimental research on surface modification during electrical discharge machining (EDM) by depositing a hard layer over the work surface of C-40 grade plain carbon steel using specially prepared powder metallurgy compact tools. The investigated process parameters were composition, compaction pressure, sintering temperature, pulse on-time, peak?Ccurrent setting, and duty factor. Measurements of deposited layer thickness, mass transfer rate, tool wear rate, surface roughness and microhardness were undertaken on the EDM-ed specimens. Different studies like X-ray diffraction, optical microscopy, scanning electron microscopy, and energy dispersive X-ray spectroscopy were carried out to ascertain the characteristics of the deposited layer on the work surface. These analyses confirmed the presence of the tool materials in the work surface layer. At first, an L-16 orthogonal array was applied as Taguchi DOE technique and the ANOVA was done to study the effects of pertinent process parameters. An optimum condition was achieved using overall evaluation criteria. Later on, a detailed study was carried out to get a smooth and regular deposition of material. The characterization of the deposited layer is presented. The deposited layer with a wide range of average layer thickness of 3?C785???m, enriched with tool materials (W and Cu) and with the formation of tungsten carbide, and having microhardness of 9.81?C12.75?GPa at the hardest zone was successfully deposited over the work surface.